ُسرور HP ProLiant BL620c G7

Byadmin

ُسرور HP ProLiant BL620c G7

ُسرور HP ProLiant BL620c G7

At A Glance
This document covers the HP ProLiant BL620c G7 server blade only. For more information on the HP BladeSystem c-Class Enclosure and HP BladeSystem c-Class Interconnects, please see the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_na/12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_na/12810_na.html
HP BladeSystem c-Class Interconnect and Mezzanine Components QuickSpecs: http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html

The HP ProLiant BL620c G7 Server Blade offers unmatched scalability, performance, and economics in a two-processor Intel® Xeon® server blade. Two models are now available, one optimized for the Intel® Xeon® E7-2800 series and the other optimized for the Intel® Xeon® 6500/7500 series. Fully utilizing the design architecture of the Intel® Xeon® 7500 chipset, up to two top performing 130W processors are supported along with 32 RDIMM slots providing 1.0TB (BL620c G7 Intel Xeon E7-2800 models) and 512MB (BL620c G7 Intel Xeon 6500/7500 models) of memory for ultimate virtualization efficiency. The four included 10Gb FlexFabric converged network adapter ports with built-in autosensing 1Gb/10Gb Ethernet, FCoE, Flex-10, hardware-based accelerated iSCSI, iSCSI boot, and TCP/IP offload engine combined with the three PCIe Gen2 mezzanine expansion slots yield an outstanding 96Gb of total I/O bandwidth.

The BL620c G7 is also perfect for 2P applications requiring performance and features greater than typical dual processor (DP) Intel® Xeon® 5000 offerings. The scalability of the BL620c G7 offers up to 800% the memory capacity and increased memory performance along with an extensive list of memory RAS features, 2,000% the embedded Ethernet bandwidth, 400% the virtual machines (VMs), 300% the on-board I/O expansion slots, and 480% the total I/O bandwidth than other 2P Intel® Xeon® servers available today.

Traditional multi-processor (MP) class server blades are typically unbalanced providing processor performance and density at the expense of proportional memory capacity and I/O bandwidth. As such, these unbalanced servers fail when faced with larger databases and higher-density virtualization applications. Today, you have a better alternative. By designing a balanced architecture, the BL620c G7 is a very progressive 2P MP blade offering that ensures that all subsystems can be used effectively under a broad range of enterprise applications and workloads. The 2P BL620c G7 along with the 4P BL680c G7 together provide a complete Intel® Xeon® portfolio creating a new class of scale-up HP ProLiant server blades delivering the reliability and performance you need to handle demanding workloads with confidence.

  • Processor:
    • One or two Intel® Xeon® E7-2800 Series processors each up to 10 cores and 130 watts (BL620c G7 Intel Xeon E7-2800 models)
      NOTE: All processors within the server must be identical.
    • One or two Intel® Xeon® 6500 or 7500 Series processors each up to 8 cores and 130 watts (BL620c G7 Intel Xeon 6500/7500 models)
      NOTE: All processors within the server must be identical.
    • Extensive list of over 35 system-wide reliability, serviceability, and availability (RAS) features: now including Double Device Data Correction (DDDC) Ready capability (BL620c G7 Intel Xeon E7-2800 models)
      NOTE: “Ready” is defined as the hardware is capable of supporting the feature with only a future planned software upgrade required to enable.
    • Intel® Advanced Encryption Standard New Instructions (Intel® AES-NI) delivering robust encryption without the need for additional appliances or increased performance overhead for improved encryption performance and efficiency (BL620c G7 Intel Xeon E7-2800 models)
    • Intel® Trusted Execution Technology (TXT) Ready for a more secure system by helping to detect and prevent malicious software attacks (BL620c G7 Intel Xeon E7-2800 models)
      NOTE: “Ready” is defined as the hardware is capable of supporting the feature with only a future planned software upgrade required to enable.
    • Intel® 7500 chipset with two integrated memory controllers per processor for maximum system performance
    • Intel 7510 Scalable Memory Buffer providing up to 1.8W (maximum) and 4.4W (idle) power savings per each SMI (BL620c G7 Intel Xeon E7-2800 models)
    • Intel Intelligent Power Technology including (BL620c G7 Intel Xeon E7-2800 models):
      • Lower partial active power that automatically pleases processor, memory, and I/O controller into the lowest available power states to meet the current workload while minimizing performance impact
      • Lower idle power that allows idling cores to be reduced to near-zero power independent of other cores, reducing server idle power consumption
    • Meshed network of four Intel® QuickPath Interconnects (Intel® QPI) each up to 6.4GT/s (25.6GB/s data bandwidth) for point-to-point high speed links increasing bandwidth and lowering latency
    • Intel® Hyper-threading resulting in higher processing throughput and improved multi-threaded application performance
    • Intel® Turbo Boost Technology that can automatically operate the processor(s) at a faster frequency than the base operating frequency under certain circumstances.
    • Up to 30MB of L3 cache per processors increasing efficiency of cache-to-cache data transfers maximizing memory bandwidth while reducing latency through storing greater amount of data thus reducing data transfers to memory.
    • Intel® Virtualization Technology that assist virtualization software in generating more efficient virtualization solutions.
    • PCI Gen2 increasing bandwidth up to 4 GB/s on each x8 PCI Express Gen2 connection.
  • BL620c G7 Memory:
    • 1.0TB memory capacity via thirty-two (32) DDR3 registered DIMMs (RDIMM) slots operating up to 1066MHz (BL620c G7 Intel Xeon E7-2800 models)
      NOTE: The DDR3 memory speed is a function of the processor Intel® QPI speed. See the “Memory” section below for details.
    • 512MB memory capacity via thirty-two (32) DDR3 registered DIMMs (RDIMM) slots operating up to 1066MHz (BL620c G7 Intel Xeon 6500/7500 models)
      NOTE: DDR3 memory speed is a function of the processor Intel® QPI speed. See the “Memory” section below for details.
    • 8GB, 16GB and 32GB 1.35V DDR3L RDIMM low power memory options providing up to a 0.15V power savings per each DIMM compared to standard 1.5V DDR3 RDIMMs (BL620c G7 Intel Xeon E7-2800 models)
    • For maximum memory bandwidth, performance, and capacity, two integrated memory controllers per each processor that connect to a total of four Intel® Scalable Memory Buffers (SMB)
    • Memory RAS features including:
      • Data bus ECC protection and advanced ECC / SDDC
      • Demand scrubbing
      • DIMM address/control bus parity protection
      • Memory mirroring and memory failover
      • Rank sparring (online spare)
      • Intel® SMI lane and clock failover
      • Intel® SMI packet retry
      • Failed DIMM isolation
  • Storage Controller:
    • Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with RAID 0 and 1.
      NOTE: The P410i is configured with no cache allowing the end user to select the desired cache option (if cache is desired in the first place).
    • P410i 512MB and 1GB flash backed write cache (FBWC) options
    • Optional Storage Works RAID mezzanine controllers (with BBWC and FBWC) for connection to external storage.
    • Two (2) slots for BBWC and/or FBWC battery options.
      NOTE: The server supports up to a combined total of two (2) battery cache options for the P410i and/or optional Storage Works RAID controllers.
    • Optional StorageWorks IO Accelerator cards for high performance I/O.
    • Optional P700m StorageWorks Controller for direct attach and shared SAS storage external to the c-Class enclosures
    • Optional HP D2200sb PCIe Storage Blade for direct attached and shared storage within the c-Class enclosures
  • Internal Drive Support:
    • Two (2) hot-plug small form factor (SFF) drive bays
    • Support for SAS, SATA, and SSD hot-plug hard drives
  • Network Controller:
    • Four (4) embedded HP NC553i 10Gb FlexFabric adapter ports supporting autosensing 10Gb/1Gb Ethernet, FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, and iSCSI boot.
      NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric 10Gb/24-port Module or HP 10GbE Pass-Thru Module.

      • The embedded adapter ports are routed interconnect bays 1 and 2 (c7000) and interconnect bay 1 (c3000)
    • One (1) 10/100 network adapter port dedicated to iLO 3 Management
  • Mezzanine Support:
    • Three (3) mezzanine expansion slots as follows:
      • Two (2) Type II (25 watts) x8 PCIe Gen2; mezzanine slots 2 and 3 supporting QDR IB, 4Gb and 8Gb FC, 10Gb FlexFabric, 10Gb Flex10, 10GbE, 1GbE, I/O accelerator cards, the Storage Works RAID controllers, and the PCI Pass-thru Expansion card.
        • Mezzanine slot’s 2 ports are routed to interconnect bays 5,6,7,8 (c7000) and 3,4,3,4 (c3000)
        • Mezzanine slot’s 3 ports are routed to interconnect bays 7,8,5,6 (c7000) and 3,4,3,4 (c3000)
      • One (1) Type I (15 watts) x4 PCIe Gen2; mezzanine slot 1 supporting 4Gb and 8Gb FC, 10Gb FlexFabric, 10Gb Flex10, 10GbE, 1GbE, and the I/O accelerator cards
        • Mezzanine slot’s 1 ports are routed to interconnect bays 3,4,3,4 (c7000) and 2,2,2,2 (c3000)
      • NOTE: HP recommends 10Gb adapters be installed in a x8 PCIe slot for optimal performance.
      • NOTE: Type II slots accept both Type I or Type II cards. Type I slots accepted Type I cards only.
  • Expansion Blade Support:
    • Up to two HP BladeSystem Expansion Blades (Ultrium Tape Blades, PCI Expansion Blade, and Storage Expansion Blade) are supported using the HP PCI Expansion Pass-thru mezzanine Card. One HP PCI Express Mezzanine Pass-Thru Card is required per Expansion Blade.
      NOTE: The PCI Express Mezzanine Pass-Thru Card(s) must be installed in mezzanine slots 2 and/or 3.
      NOTE: In a c3000 rack enclosure where the blades are installed horizontally, up to two expansion blades may installed in the two slots created by the mini divider in the top half of the enclosure with a BL620c G7 installed in the lower half of the enclosure.
      NOTE: In a c3000 tower and c7000 rack enclosure where the blades are installed vertically, two expansion blades may installed in the blade slots adjacent to the BL620c G7 by staking one on top of another via a blade coupler that is included with the PCI Express Mezzanine Pass-Thru Card and the expansion blades. If a single expansion blade is installed, it must be installed in the lower slot adjacent to the BL620c G7; a half-height server may be installed above the expansion blade.
  • Internal USB and SD Support:
    • One (1) internal USB 2.0 connector for USB flash media drive keys
    • One (1) internal micro secure digital high capacity (SDHC) card slot
  • Trusted Platform Module (TPM):
    • One (1) internal TPM 1.2 module connector
  • Infrastructure Management:
    • This server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades Firmware Maintenance website at: http://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html
    • HP Integrated Lights-Out 3 (iLO 3) management processor for simplified server setup, health monitoring and recovery, power and thermal control, and lights-out remote administration.
    • HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, monitor, control and optimize your IT infrastructure through a single, simple management console. Insight Control supports both Windows and Linux-based central management servers.
    • HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization’s changing business requirements.
  • Operating System Support:
    • Microsoft Windows, RHEL, SLES, Oracle Solaris, VMware, and Citrix XenServer
  • Form Factor:
    • Full height, single wide server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures
  • Enclosures:
    • HP offers two different c-Class server blade enclosures to meet your individual needs:
      • The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 8 HP ProLiant BL620c G7 servers plugged vertically.
      • The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 4 HP ProLiant BL620c G7 servers plugged horizontally.
    • Server blades, storage blades, and interconnect modules are all designed to fit into the c7000 and c3000 enclosures.
    • For additional enclosure information, please see: http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
  • Warranty:
    • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
      NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

About the author

admin administrator

Leave a Reply

2 × five =