سرور HPE Proliant BL420c G8
Standard Features
Page 2
NOTE: This document covers the HPE ProLiant BL420c Gen8 server blade only. For information on HPE BladeSystems c-Class
Platinum Enclosures and HPE BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
HPE BladeSystem c-Class Enclosures QuickSpecs:
• HPE BladeSystem c3000 Enclosure QuickSpecs at
http://h18000.www1.hp.com/products/QuickSpecs/12790_na/12790_na.html
NOTE: The c3000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades
are supported in the new enclosures and any future server blades will be supported in the existing enclosures.
• HPE BladeSystem c7000 Enclosure QuickSpecs at
http://h18000.www1.hp.com/products/QuickSpecs/12810_na/12810_na.html
NOTE: The c7000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
• HPE BladeSystem c-Class Interconnect and Mezzanine Components at
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For proper BladeSystem operation, the minimum required versions of HPE Onboard Administrator and HPE Virtual
Connect are required and available via the HPE Service Pack for ProLiant, please see http://www.hp.com/go/spp/download.
NOTE: For optimal cooling and system performance the BL420c Gen8 requires the c7000 enclosure to be configured with 10
fans and the c3000 enclosure to be configured with 6 fans.
NOTE: For the Standard Features shipped in the “Factory Integrated Models”, please see the “Configuration Information –
Factory Integrated Models” section.
Processor
One of the following
depending on Model
E5-2400 v2 series Processors
Intel® Xeon® E5-2470v2 (2.4GHz/10-core/25MB/95W) Processor
Intel® Xeon® E5-2450v2 (2.5GHz/8-core/20MB/95W) Processor
Intel® Xeon® E5-2440v2 (1.9GHz/8-core/20MB/95W) Processor
Intel® Xeon® E5-2430v2 (2.5GHz/6-core/15MB/80W) Processor
Intel® Xeon® E5-2420v2 (2.2GHz/6-core/15MB/80W) Processor
Intel® Xeon® E5-2407v2 (2.4GHz/4-core/10MB/80W) Processor
Intel® Xeon® E5-2403v2 (1.8GHz/4-core/10MB/80W) Processor
Intel® Xeon® E5-2450Lv2 (1.7GHz/10-core/25MB/60W) Processor
Intel® Xeon® E5-2430Lv2 (2.4GHz/6-core/15MB/60W) Processor
E5-2400 series Processors
Intel® Xeon® E5-2470 (2.3GHz/8-core/20MB/95W) Processor
Intel® Xeon® E5-2450 (2.1GHz/8-core/20MB/95W) Processor
Intel® Xeon® E5-2450L (1.8GHz/8-core/20MB/70W) Processor
Intel® Xeon® E5-2440 (2.4GHz/6-core/15MB/95W) Processor
Intel® Xeon® E5-2430 (2.2GHz/6-core/15MB/95W) Processor
Intel® Xeon® E5-2430L (2.0GHz/6-core/15MB/60W) Processor
Intel® Xeon® E5-2420 (1.9GHz/6-core/15MB/95W) Processor
Intel® Xeon® E5-2407 (2.2GHz/4-core/10MB/80W) Processor
Intel® Xeon® E5-2403 (1.8GHz/4-core/10MB/80W) Processor
NOTE: In a 2 processor configuration, there are twelve (12) total available DIMM slots.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend
on the quantity and type of DIMMs installed.
NOTE: The BL420c Gen8 supports one or two processors.
NOTE: The BL420c Gen8 includes two I/O mezzanine expansion slots. A processor must be installed in
processor slot 1 for access to the first mezzanine expansion slot (expansion slot 1). A processor must be
installed in processor slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical. Mixing different processor models is not
supported.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies except the
E5-2403 and E5-2407.
NOTE: The letter “L” following the model number indicates denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the maximum speed
memory can operate. Please see the see the “Memory” section later in this document.
Cache Memory
One of the following
depending on Model
25MB shared L3 cache
NOTE: For Ten-core processors.
20MB shared L3 cache
NOTE: For Eight-core processors.
15MB shared L3 cache
NOTE: For Six-core processors.
10MB shared L3 cache
NOTE: For Quad-core processors.
Chipset Intel® C600 Series Chipset
Intel® E5-2400 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following:
http://www.intel.com/products/server/chipsets/.
Upgradeability Upgradeable to two (2) processors
NOTE: Processor upgrade available from Intel® Xeon® Processors E5-2400 to E5-2400 v2. Please contact
Hewlett Packard Enterprise Technology Sales (http://www.hp.com/support), your local Hewlett
Packard Enterprise Re-seller, or reference the following Customer Advisory: ProLiant Servers-
Instructions for Upgrading an HPE ProLiant Gen8 Server from an Intel Xeon Processor E5-2400 to an
Intel Xeon Processor E5-2400v2, regarding critical details before upgrading. An explanation of
requirements and limitations are provided.
On System
Management
Chipset
HPE iLO (Firmware: HPE iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo
Memory Protection Advanced ECC
Memory Online Spare Mode (Rank Spare Mode)
Memory Lockstep Mode
Memory
One of the following
depending on Model
Type HPE SmartMemory
DDR3 Load Reduced (LRDIMM), Registered (RDIMM), or Unbuffered ECC (UDIMM)
Standard (Pre- 12GB (3 x 4GB) DDR3 1333MHz RDIMMs at 1.35V
configured Models) 24GB (6 x 4GB) DDR3 1600MHz RDIMMs at 1.5V
Maximum (LRDIMM) 384GB (12 x 32GB) up to 1600MHz at 1.5V
Maximum (RDIMM) 192GB (12 x 16GB) up to 1600MHz at 1.5V
192GB (12 x 16GB) up to 1333MHz at 1.35V
Maximum (UDIMM) 96GB (12 x 8GB) up to 1600MHz at 1.5V
96GB (12 x 8GB) up to 1333MHz at 1.35V
NOTE: HPE memory from previous generation servers are not qualified or warranted with this server.
HPE SmartMemory is required to realize the memory performance improvements and enhanced
functionality listed in this document for Gen8. For additional information, please see the HPE
SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/QuickSpecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a
server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.
NOTE: The Intel Xeon E5-2400 Processor Family cannot be configured with the new 1866MHz HPE
Smart Memory or the new 1600MHz Low Voltage (1.35v) HPE Smart Memory.
NOTE: Depending on the memory configuration and processor model, 1866MHz, 1600MHz and 1333MHz
memory may operate at a lower speed. Please see the see the “Memory” section later in this document
and the Online Memory Configuration Tool for details at: www.hp.com/go/ddr3memory-configurator.
NOTE: The Intel Xeon E5-2400v2 processor architecture supports memory speeds up to 1600MHz.
1866MHz HPE Smart Memory will run at 1600MHz.
Network Controller
One of the following
depending on Model
NOTE: Supports one of the following FlexibleLOMs and iLO Management.
One (1) HPE FlexFabric 10Gb 2-port 554FLB FlexibleLOM
NOTE: Supports FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot,
and autosensing 10Gb/1Gb Ethernet.
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HPE BladeSystem c-Class
interconnect components. Both ports will operate at the same speed.
NOTE: FlexFabric capabilities require the use of an HPE Virtual Connect FlexFabric module. Fibre
Channel over Ethernet (FCoE) is supported with the HPE 10GbE Pass-Thru Module, HPE 6120XG Blade
Switch with the CEE license installed, HPE Cisco B22HPE Fabric Extender and HPE Cisco B22HPE Fabric
Extender with 16 FET for BladeSystem c-Class. Learn more at http://www.hp.com/go/virtualconnect.
One (1) HPE Flex-10 10Gb 2-port 530FLB FlexibleLOM
One (1) HPE Ethernet 10Gb 2-port 560FLB FlexibleLOM
One (1) HPE Ethernet 1Gb 2-port 361FLB FlexibleLOM
NOTE: FlexibleLOMs are not compatible with prior generation c-Class server blades
Standard iLO Network Controller:
One (1) 10/100 Mbps port for the HPE iLO 4 On System Management Chipset
One (1) 10/100 Mbps port for the HPE iLO 4 to Onboard Administrator link. The Onboard Administrator (with
10/100/1000 Mbps) to BladeSystem link is 1Gbps.
Expansion Slots Two (2) I/O expansion mezzanine slots:
• x8 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1).
NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed to
interconnect module bay 3 and the other to bay 4.
• x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2).
NOTE: This expansion slot supports dual-port and quad-port mezzanine cards. For dual-port
cards, one port is routed to interconnect module bay 5 and the other to bay 6. For quad-port
cards, one port is routed to interconnect module bay 5, one to bay 6, one to bay 7, and one to
bay 8.
NOTE: A second processor must be installed (in processor slot 2) to have access to the second
expansion slot (expansion slot 2).
Mezzanine card options include:
• Dual-port 10Gb FlexFabric,10Gb Flex-10, 10GbE options, and quad-port 1Gb Ethernet server adapter
mezzanine options for additional network ports
• Dual-port 8Gb Fibre Channel HBA for SAN connectivity
• QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity
• I/O accelerator mezzanine options for high transaction rate local storage
HPE Server ROM HPE ROM (read only memory) is now digitally signed using Hewlett Packard Enterprise’s Corporate Signing
Service. This signature is verified before the flash process starts, reducing accidental programming and
preventing malicious efforts to corrupt system ROM.
HPE ROM provides for essential initialization and validation of hardware components before control is passed
to the customer-installed operating system. The ROM also provides the capability of booting from various
fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.
HPE ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early phase of
hardware initialization, suitable messages are now displayed on the connected monitor. Additionally, these
configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis.
HPE’s ProLiant ROM is used to configure the following:
• Processor and chipset status registers
• System memory, memory map, and memory initialization
• System hardware configuration (integrated PCI devices and optional PCIe cards).
• Customer-specific BIOS configuration using the HPE ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to The Hewlett Packard Enterprise RBSU (ROM based setup
utility) user guide: http://www.hp.com/support/rbsu
Storage Controller One of the following
depending on Model
One (1) HPE Smart Array P220i Controller with 512MB FBWC, (RAID 0 and 1)
NOTE: Upgradeable firmware with recovery ROM.
NOTE: The HPE Smart Array P220i supports two (2) small form factor (SFF) hot
plug drive bays.
One (1) HPE Dynamic Smart Array B320i Controller (SATA RAID 0 and 1 standard;
SAS RAID 0 and 1 standard on preconfigured models and optional with SAS License
Key upgrade on Configure-to-Order models)
NOTE: HPE Dynamic Smart Array B320i supports two (2) small form factor (SFF)
hot plug drive bays.
NOTE: The server supports up to a combined total of two (2) FBWC supercap
options.
Available Options: Smart Array Advanced Pack Software for enhanced performance,
reliability, availability, and security of system data, SAS License Key (RAID 0 and 1) and
HPE 512MB FBWC for B-Series Smart Array.
Maximum Internal
Storage
Hot Plug SFF SAS 4.0TB 2 x 2.0TB
Hot Plug SFF SATA 4.0TB 2 x 2.0TB
Hot Plug SFF SAS SSD 3.2TB 2 x 1.6TB
Hot Plug SFF SATA SSD 3.2TB 2 x 1.6TB