NAS Specific Commands:

nas_disk   -list    Lists the disk table
nas_checkup     Runs a system health check.
nas_pool   -size -all    Lists available space on each defined storage pool
nas_replicate  -info –all | grep <fs>  Info about each filesystem’s replication status, grep to view just one.
nas_replicate  -list    A list of all current replications
nas_server  -list     Lists all datamovers. 1=primary,4=standby,6=rdf (remote data facility)
<watch> /nas/sbin/getreason   Shows current status of each datamover. 5=up, 0=down or rebooting
nas_fs      Creates, deletes, extends, modifies, and lists filesystems.
nas_config     Control station configuration (requires root login)
nas_version     View current nas revision
nas_ckpt_schedule    Manage  checkpoint schedule
nas_storage -list   List the attached backend storage systems (with ID’s)
nas_storage -failback id=<x>    Fail back failed over SP’s or disks
nas_server  -vdm <vdm_name> -setstate loaded      Loads a VDM
nas_server  -vdm <vdm_name> -setstate mounted    Unloads a VDM
/nas/sbin/t2reset pwron -s   This command will power on a data mover that has been shut down.  This was user submitted in the comments on this post.

Several nas_<x> commands can be run with a database query for reporting purposes.  View my blog post about it here: https://emcsan.wordpress.com/2013/07/01/using-the-database-query-option-on-celerra-vnx-file-commands/

Server specific commands:

server_cpu server_<x> -r now   Reboots a datamover
server_ping <IP>    ping any IP from the control station
server_ifconfig server_2 –all   View all configured interfaces
server_route server_2 {-list,flush,add,delete}   Routing table commands
server_mount     Mount a filesystem
server_export     Export a filesystem
server_stats     Provides realtime stats for a datamover, many different options.
server_sysconfig    Modifies hardware config of the data movers.
server_devconfig    Configures devices on the data movers.
server_sysstat     Shows current Memory, CPU, and thread utilization
server_log server_2    Shows current log
vi /nas/jserver/logs/system_log   Java System log
vi /var/log/messages    System Messages
server_ifconfig server_2 <interface_name> up  Bring up a specific interface
server_ifconfig server_2 <interface_name> down Take a specific interface down
server_date     Sets system time and NTP server settings
server_date <server_X> timesvc start ntp <time_server_IP_address>  Starts NTP on a data mover
server_date <server_X> timesvc stats ntp    To view the status of NTP.
server_date <server_X> timesvc update ntp    Forces an update of NTP
server_file     FTP equivalent command
server_dns     Configure DNS
server_cifssupport    Support services for CIFS users

To create a single checkpoint:
nas_ckpt_schedule -create <ckpt_fs_name> -filesystem <fs_name> -recurrence once

To create a Read/Write copy of a single checkpoint:
fs_ckpt <ckpt_fs_name> -name <r/w_ckpt_fs_name> -Create -readonly n 

To export a Read/Write checkpoint copy to a CIFS Share:
server_export [vdm] -P cifs -name [filesystem]_ckpt1 -option netbios=[cifserver] [filesystem]_ckpt1_writeable1

To view HBA Statistics:
.server_config server_2 -v “printstats fcp reset”  Toggles the service on/off
.server_config server_2 -v “printstats fcp full”     View the stats table (must wait a while for some stats to collect before viewing)

To Join/Unjoin a CIFS Server from the domain:
server_cifs server_2 -Join compname=SERVERNAME,domain=DOMAIN.COM,admin=ADMINID
server_cifs server_2 -Unjoin compname=SERVERNAME,domain=DOMAIN.COM,admin=ADMINID

To view the current domain controllers visible on the data mover:
.server_config server_2 -v “pdc dump”

To enable or disable a domain controller on the data mover:
.server_config server_2 -v “pdc enable=<ip_address>”  Enable a domain controller
.server_config server_2 -v “pdc disable=<ip_address>”  Disable a domain controller

To stop and start the CIFS service:
server_setup server_2 -P cifs -o stop   Stop CIFS Service
server_setup server_2 -P cifs -o start  Start CIFS Service

To stop, start or check the status of the iSCSI service:
server_iscsi server_2 -service -start     Start iSCSI service
server_iscsi server_2 -service -stop      Stop iSCSI service
server_iscsi server_2 -service -status  Check the status of the iSCSI service

To enable/disable NDMP Logging:
Turn it on:
.server_config  server_x  “logsys set  severity  NDMP=LOG_DBG2”
.server_config  server_x  “logsys set  severity  PAX=LOG_DBG2”
Turn it off:
.server_config  server_x  “logsys  set severity  NDMP=LOG_ERR”
.server_config  server_x  “logsys set severity   PAX=LOG_ERR”

For gathering performance statistics:
server_netstat server_x -i               Interface statistics
server_sysconfig server_x -v         Lists virtual devices
server_sysconfig server_x -v -i vdevice_name  Informational stats on the virtual device
server_netstat server_x -s -a tcp  Retransmissions
server_nfsstat server_x                    NFS SRTs
server_nfsstat server_x -zero        Reset NFS stats

Filesystem specific commands:

fs_ckpt      Manage Checkpoints
fs_dhsm     Manage File Mover
fs_group     Manage filesystem groups

Complete List of  “nas_”  Commands:

This is just for reference, you can easily pull up this list from a Celerra by typing nas_ and hitting the tab key.

nas_acl
nas_ckpt_schedule
nas_dbtable
nas_emailuser
nas_inventory
nas_pool
nas_slice
nas_task
nas_automountmap
nas_cmd
nas_devicegroup
nas_event
nas_license
nas_quotas
nas_stats
nas_version nas_cel
nas_copy
nas_disk
nas_fs
nas_logviewer
nas_replicate
nas_storage
nas_volume
nas_checkup
nas_cs
nas_diskmark
nas_fsck
nas_message
nas_server
nas_symm
nas_xml

Complete list of  “server_”  Commands:

This is just for reference, you can easily pull up this list from a Celerra by typing server_ and hitting the tab key.

server_archive
server_cifssupport
server_file
server_log
server_name
server_ping6
server_sysconfig
server_vtlu
server_arp
server_cpu
server_ftp
server_mgr
server_netstat
server_rip
server_sysstat
server_cdms
server_date
server_http
server_mount
server_nfs
server_route
server_tftp
server_cepp
server_dbms
server_ifconfig
server_mountpoint
server_nfsstat
server_security
server_umount
server_certificate
server_devconfig
server_ip
server_mpfs
server_nis
server_setup
server_uptime
server_checkup
server_df
server_iscsi
server_mpfsstat
server_param
server_snmpd
server_usermapper
server_cifs
server_dns
server_kerberos
server_mt
server_pax
server_standby
server_version
server_cifsstat
server_export
server_ldap
server_muxconfig
server_ping
server_stats
server_viruschk

Complete list of  “fs_” Commands:

This is just for reference, you can easily pull up this list from a Celerra by typing fs_ and hitting the tab key.

fs_ckpt
fs_dedupe
fs_dhsm
fs_group
fs_rdf
fs_timefinder

نوشته دستورات پرکاربرد Celerra VNX File اولین بار در راهکارهای جامع دیتاسنتر. پدیدار شد.