سرور HP Integrity BL860c i2
At A Glance
This document covers the HP Integrity BL860c i2 server blade only. For more information on HP BladeSystem c-Class Enclosures
and HP BladeSystem c-Class Interconnects, please see the following QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
HP BladeSystem c-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html
The HP Integrity BL860c i2 delivers the performance, reliability, and availability on 64-bit operating systems (HP-UX 11i v3,
Microsoft Windows® Server 2008 R2 for Itanium-based systems and OpenVMS v8.4) for the ultimate in scalability and flexibility in
deployment: To further enrich your cost-efficient, consolidated Integrity blade infrastructure, HP Insight Dynamics – VSE for HP
Integrity servers can help with solution components such as HP Integrity Virtual Machines, HP Capacity Advisor and Virtualization
Manager, HP Global Workload Manager and HP-UX Workload Manager, HP Insight Dynamics – VSE infrastructure orchestration HP
Insight Dynamics – VSE Reference Architectures, and HP Serviceguard. HP Integrity BL860c i2 server blade includes:
Processor:
Up to two Intel® Itanium® 9300 Series processors
Memory:
Up to 192 GB of memory. Supporting (24) PC3 10600 Registered CAS9 memory DIMMs
Storage Controller:
Embedded HP p410i SAS RAID Controller integrated on system board
RAID 1, RAID 0, and HBA mode configuration options
Internal Drive Support:
Supports up to (2) two small form factor (SFF) SAS hot plug hard drives
Network Controller:
Four (4) NIC ports via two (2) embeddedNC532i Dual Port Flex-10 Multifunction Server Adapters
NOTE: Flex-10 capability requires OS drivers and the use of an HP Virtual Connect Flex-10 10GbE Ethernet module.
Learn more at: www.hp.com/go/virtualconnect
NOTE: BL8x0c i2 server blades require Virtual Connect 3.00 or later when used in Virtual Connect configurations
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class interconnect
components
Plus one (1) additional 10/100 NIC dedicated to Integrity iLO 3 Management
Mezzanine Support:
Three (3) additional I/O expansion slots via mezzanine cards.
Supports up to (3) mezzanine cards
HP NC532m Dual Port Flex-10 10GbE BL-c Adapter HP Emulex LPe1205 8Gb FC BL-c HBA (2-Port 8Gb
Emulex FC HBA)
HP QMH 2562 8Gb FC BL-c HBA (2-Port 8Gb QLogic FC HBA)
HP Smart Array P700m/512 Controller
HP NC364m 4-Port 1GbE BL-c Adapter
HP NC360m 2-Port 1GbE BL-c Adapter
USB Support:
One (1) internal USB port on the BL860c i2
Two (2) External USB ports on the BL860c i2 via SUV cable
Management:
HP Integrity Server Blades Management Software
Integrity Integrated Lights-Out 3 (iLO 3) management processor
HP Insight Control
HP System Management Homepage
HP-UX 11i Management Software for Integrity Blades, www.hp.com/go/hpuxblades
HP Ignite-UX
HP Software Assistant (SWA)
HP Dynamic Root Disk (DRD)
HP BladeSystem Infrastructure Management Software:
HP BladeSystem c-Class Onboard Administrator
HP BladeSystem c-Class Virtual Connect
Enterprise Management Software
Data Protector Software
GlancePlus Pak
Performance Manager and Agent
Virtualization with HP Insight Dynamics – VSE www.hp.com/go/insightdynamics/integrity
Advanced Infrastructure Management
HP Capacity Advisor
HP Virtualization Manager
HP Global Workload Manager and HP-UX Workload Manager
HP Insight Dynamics – VSE infrastructure orchestration
HP Systems Insight Manager
Partitioning Continuum
HP Integrity Virtual Machines (with HP-UX guest OS’s and Windows Guest OS’s)
HP Process Resource Manager/pSets
Secure Resource Partitions
Continuous availability
HP Serviceguard for HP-UX 11i
HP Serviceguard Extensions for SAP
HP Serviceguard Extensions for Faster Failover
HP Insight Dynamics – VSE Reference Architectures
Form Factor:
HP Integrity BL860c i2 server blade is a full-height, BladeSystem c-Class form factor. The BL860c i2 server blade plugs
into the BladeSystem enclosure. In the c7000 enclosure, 8 server blades are supported per 10U enclosure. 4
enclosures can be configured to a standard 42U rack; 32 BL860c i2 server blades can be configured in a fully
populated rack. In the c3000 enclosure, 4 BL860c i2 server blades are supported per 6U enclosure.
Enclosures:
HP offers three different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 8 HP Integrity BL860c i2 servers
plugged vertically. Four (4) enclosures can be configured to a standard 42U rack
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 4 HP Integrity BL860c i2 servers plugged
horizontally. Up to 7 enclosures can be configured to a standard 42U rack
The HP BladeSystem c3000 tower enclosure is designed with casters for sites without racks and holds up to 4 HP
Integrity BL860c i2 servers plugged vertically.
The HP BladeSystem c3000 Enclosure targets three separate market segments:
Remote sites needing between 2 and 8 server blades
Mid-sized companies with between 3 and 100 servers in their company
Enterprise accounts with special datacenter requirement, such as DC power, or very limited rack power
and cooling capacity.
Server blades, storage blades, and interconnect modules are all designed to fit into the c7000 and c3000 enclosures.
For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
Warranty:
Protected by HP Services and a worldwide network of HP Authorized Channel Partners. Three-year parts, 3 Year Labor
and 3 Year on-site limited global warranty. Certain restrictions and exclusions apply. Hard drives have either a one
year or three year warranty; refer to specific hard drive QuickSpecs for details.