دسته‌بندی نشده

نصب و راه اندازی نرم افزار Symantec Backup Exec 15

سپتامبر 5, 2016
admin

نصب و راه اندازی نرم افزار Symantec Backup Exec 15

The quick links listed below can be used to navigate through the installation instructions if required:

  1. Download the Backup Exec (BE) installation files

 

 

  1. Install Backup Exec 15
  2. Post install recommendations

 

 

[ I ] Download Backup Exec 15

One of the following available methods can be used to download the Backup Exec 15 DVD ISO image:

 

Option 1: Download it from the MyVeritas portal

1. Go to http://my.veritas.com

2. Sign in with your Veritas Account.

3. Click on Licensing from the menu bar.

4. Locate and click on the Entitlement ID link from the list.

Note: If the required Entitlement ID is not listed, go to Entitlements tab and click on the appropriate links to redeem a voucher or register an entitlement.

5. On the Product Information page – Locate and click on the Download button next to the required product description.

6. Select the check box next to the required file(s) from the list. Click on Download Selected Files and Select a location to save the file(s).

Note: This ZIP file includes installation files for Backup Exec server, Administration Console, Agent for Windows (AWS) and Simplified Recovery Disk (SDR) Creatoin Wizard.

After downloading the ZIP file, extract the file to obtain the full DVD image. Once the DVD image is extracted, there are multiple ways to use it:

  • Extract the ISO with an extract/unzip program or
  • Mount the ISO as a DVD drive using virtual DVD software or
  • Burn the ISO to a physical DVD.

 

 

Option 2: Download from the Backup Exec Trialware web site

1. Go to https://www.veritas.com/trial/en/us/backup-exec-15.html

2. Complete the trialware download form.

Note: Although the web site says ‘free 60-day evaluation’, please note that the files downloaded from this web site are the same as the full version downloaded from MyVeritas. If a valid license key is not entered during the installation, the product would run in a 60-day evaluation mode from either location. As soon as a license is installed the program will come out of evaluation mode.

3. Click “I accept the terms and conditions of the Trialware Agreement” and then click on Submit.

4. On the Software Download screen – Click on Download Now beside Backup Exec 15
Note: This ZIP file includes installation files for Backup Exec server, Administration Console, Agent for Windows (AWS) and Simplified Recovery Disk (SDR) Creatoin Wizard.

5. Once the ISO is downloaded, there are multiple ways to use it:

  • Extract the ISO with an extract/unzip program or
  • Mount the ISO as a DVD drive using virtual DVD software or
  • Burn the ISO to a physical DVD.

 

 

[ II ] Install Backup Exec 15

1. Double click on the “Browser.exe” file from the DVD media to launch a Backup Exec installation. This will display the installation language selections

Figure 1

The Welcome to Backup Exec 15 screen contains three options:

  • Getting Started: This option will provide helpful documentation and links about the product.
  • Pre-installation: Environment Checker.
  • Install Products: Lists options to Install Backup Exec or Backup Exec Agent for Windows.

    Select Install Products to continue with Backup Exec 15 installation

2. The Installation screen contains the following three options:

Figure 2

Select Backup Exec to start the installation wizard which provides guidance through the installation process.

  • Backup Exec: Selecting this option will start installation wizard for Backup Exec server or the Remote Administration Console on this computer.
  • Backup Exec Agent for Windows: Selecting this option will install the Backup Exec Agent for Windows on this computer.
  • Simplified Disaster Recovery Disk Creation Wizard: Selecting this option will install the Simplified Disaster Recovery Creation Wizard on this computer. The Remote Administration Console is also included in this installation.

3. Select I Agree to accept the End User License Agreement and click Next to continue with the installation.

4. Select the type of installation (Typical installation selected by default).

(a) Typical installation

(b) Custom installation
4. (a) Typical installation of Backup Exec will install a single Backup Exec server that will backup itself and/or a few other computers

Figure 3

Note: Options for the 4 (b) Custom installation method are discussed below – click here to see what these options are.

5. Click Next to continue.

6. The Backup Exec Installation will run the Environment Check. (See Related Documents section for more details)

Figure 4

7. Review the summary and click Next to continue.

8. If the media server has an internet connection available, enter a valid Backup Exec 15 serial number and select Add to list. An internet connection is required because entering a serial number will prompt BE to download the appropriate SLF for the server. Otherwise choose Import from File and browse to the SLF file that was sent with the product documentation.

Note: Repeat step 7 as often as necessary in order to add more licenses for additional Backup Exec Agents & Options. If no license numbers are entered, Backup Exec will be installed in a 60-day Trial Mode for evaluation.

Figure 5

9. Enter a user name, password, and domain for the Backup Exec services to use as a logon account. It is recommended to give the Backup Exec Service Account (BESA) a Domain user account belonging to the Domain Admins and Local Administrators groups.

Backup Exec Service Account (BESA) – http://www.veritas.com/docs/000008077

Select a Destination Folder to install Backup Exec. By default the location is C:\Program Files\Symantec\Backup Exec. It can be changed if required by clicking on the Change button. Click Next to continue.

Figure 6

The following rights may be required:

  • Act as part of the operating system
  • Backup Files and Directories
  • Logon as a batch job (Windows 2008 and higher)
  • Logon as a service
  • Manage Auditing and Security Logs
  • Restore Files and Directories
  • Take ownership of files and other objects

Also make sure the account is not added under:

  • Deny logon as a batch
  • Deny logon as a service

10. The Add Remote Computer will begin with process of push installing the Agent for Windows Systems (AWS) to remote systems. If this step is bypassed, it can be performed after the installation is complete at any time. Usually it is a good idea to complete the BE installation, run LiveUpdate until the program is up to date, and then install the Remote Agents.

See Related Documents for additional guidance on the push installation of AWS.

Figure 7

11. Review the Backup Exec Installation summary, and click Install to begin the Installation.

Figure 8

Note: The installation process may takes several minutes to complete. During the process, the progress bar may not move for several minutes.

12. After the installation is complete, the following options are displayed:

  • Participate in the Backup Exec Improvement Program.
  • Run Live Update.
  • View the readme.
  • Create a shortcut to Backup Exec on the Desktop.

13. Click Finish after selecting the appropriate check boxes

Note: A reboot may be required to complete the installation.

Click here to navigate to the next step i.e. Post-install recommendations

 

4. (b) Custom installation of Backup Exec allows more control over installation settings

Figure 9

Selecting this method allows the administrator to confirm the following before Backup Exec installation begins:

5. Choose between Local Installation or Remote Installation: On this screen the administrator can choose to perform a Local installation of the Backup Exec server / the Administration Console or to perform a Remote Installation of Backup Exec server, additional agents and options or Agent for Windows (AWS) to remote computers.

Figure 10

6. Run the Environment Check: The Backup Exec Installation will run the Environment Check. (See Related Documents section for more details)

7. Add serial numbers: If the media server has an internet connection available, enter a valid Backup Exec 15 serial number and select Add to list. An internet connection is required because entering a serial number will prompt BE to download the appropriate SLF for the server. Otherwise choose Import from File and browse to the SLF file that was sent with the product documentation.

Note: Repeat step 7 as often as necessary in order to add more licenses for additional Backup Exec Agents & Options. If no license numbers are entered, Backup Exec will be installed in a 60-day Trial Mode for evaluation.

8. Select additional agents and options: Additional agents and options may be selected (in addition to those included with license keys) to run in a 60-day trial mode.  If no license keys are input, all agents and options are available in trial mode.

Figure 11

Note: If no license keys are entered during installation, all agents and options are available in trial mode.

9. Select additional languages to be installed:

Figure 12

10. Select a different location on the server where Backup Exec should be installed:

Figure 13

11. Enter the user name and password: Enter a user name, password, and domain for the Backup Exec services to use as a logon account. It is recommended to give the Backup Exec Service Account (BESA) a Domain user account belonging to the Domain Admins and Local Administrators groups.

Backup Exec Service Account (BESA) – http://www.veritas.com/docs/000008077

Select a Destination Folder to install Backup Exec. By default the location is C:\Program Files\Symantec\Backup Exec. It can be changed if required by clicking on the Change button. Click Next to continue.

Figure 14

The following rights may be required:

  • Act as part of the operating system
  • Backup Files and Directories
  • Create a token object
  • Logon as a batch job (Windows 2008 and higher)
  • Logon as a service
  • Manage Auditing and Security Logs
  • Restore Files and Directories
  • Take ownership of files and other objects

Also make sure the account is not added under:

  • Deny logon as a batch
  • Deny logon as a service

 

12. Select an existing SQL Server Instance or create the default instance in a different location on the computer: A Typical installation creates a default SQL Express 2008 R2 SP2 instance named BKUPEXEC in C:\Program Files\Microsoft SQL Server. A Custom installation allows the user to select an existing SQL instance (i.e. any supported SQL instance as per the BE 15 Software Compatibility List) as the database repository, or to create the default BKUPEXEC instance in a different location on the computer.
Note: SQL requires an unencrypted and uncompressed drive as the installation location.

Figure 15

13. Select the desired device drivers to be installed for the tape devices: A Custom installation includes the option to install Symantec device drivers for all tape devices.

Note: Symantec drivers are not Windows Certification Tested.  During the installation progress, click Continue Anyway if prompted about the device driver installation.

Figure 16

14. Review the Backup Exec Installation summary, and click Install to begin the Installation.

Figure 17

Note: The installation process may takes several minutes to complete. During the process, the progress bar may not move for several minutes.

15. After the installation is complete, the following options are displayed:

  • Participate in the Backup Exec Improvement Program.  
  • Run Live Update. 
  • View the readme. 
  • Create a shortcut to Backup Exec on the Desktop.

16. Click Finish after selecting the appropriate check boxes

Note: A reboot may be required to complete the installation.

 

[ III ] Post-Install recommendations

1. Open Backup Exec and click on the Backup Exec button. Choose Installation and Licensing – Live Update to download latest patches.

    Note: It is best to continue to run Live Update until it states that it is up to date.  This may take multiple attempts.

2. After running LiveUpdate, it is necessary to push the updated agents to all remote agents.
    Methods for installing the Agent for Windows – www.veritas.com/docs/000075482

3. Review the contents of Backup Exec 15 Readme – www.veritas.com/docs/000004566

4. Refer the Backup Exec 15 Administrator’s Guide for any configuration or usage assistance –www.veritas.com/docs/000004565

 

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *